Sharper Image Dx 4 Hd Video Streaming Drone is a quadcopter that is designed to fly in the air while capturing high-definition video and images. It is an easy-to-use drone that comes with a user manual that provides instructions on how to operate it. In this article, we will provide a step-by-step guide on how to fly and operate the Sharper Image Dx 4 Hd Video Streaming Drone.
Unboxing and Assembly
The first step in operating the Sharper Image Dx 4 Hd Video Streaming Drone is unboxing and assembly. Once you receive the package, open it and take out all the components. The package should include the drone, remote control, camera, battery, and charging cable.
Next, assemble the drone by attaching the propellers to the motors. Ensure that the propellers are attached to the correct motors, as indicated in the user manual. Then, attach the camera to the drone and insert the battery into the drone’s battery compartment. Finally, connect the battery to the drone and charge it using the charging cable.
Charging the Battery
Before flying the Sharper Image Dx 4 Hd Video Streaming Drone, you need to ensure that the battery is fully charged. To charge the battery, connect the charging cable to the drone’s battery and plug the other end into a power source. The charging time varies depending on the battery’s level of charge, but it usually takes around 60-90 minutes to fully charge.
Pairing the Drone and Remote Control
Once the battery is fully charged, you need to pair the drone and remote control before flying. To pair them, turn on the drone and remote control. Then, push the left joystick up and down to establish a connection between the drone and remote control. Once the drone’s LED lights start flashing, it means that the pairing is successful, and you can start flying the drone.
Calibrating the Drone
Before flying the Sharper Image Dx 4 Hd Video Streaming Drone, you need to calibrate it to ensure that it flies correctly. To calibrate the drone, place it on a flat surface and turn it on. Then, push both joysticks down and to the right until the drone’s LED lights start flashing. Once the LED lights stop flashing, it means that the calibration is complete, and you can start flying the drone.
Flying the Drone
Now that the Sharper Image Dx 4 Hd Video Streaming Drone is calibrated, you can start flying it. To take off, push the left joystick up slowly until the drone starts to hover. Then, use the right joystick to control the direction of the drone. To land the drone, push the left joystick down slowly until the drone lands on the ground.
When flying the drone, it is important to keep it within your line of sight and not to fly it too high. Also, avoid flying the drone in restricted areas such as airports and crowded places.
Using the Camera
The Sharper Image Dx 4 Hd Video Streaming Drone comes with a camera that allows you to capture high-definition video and images. To use the camera, turn on the drone and remote control. Then, push the camera button on the remote control to start recording. Push the same button again to stop recording.
You can also take pictures using the camera by pushing the picture button on the remote control. The pictures and videos are stored on a micro SD card that you can insert into the camera.
Conclusion
The Sharper Image Dx 4 Hd Video Streaming Drone is an easy-to-use drone that allows you to capture high-definition video and images. By following the instructions provided in this article, you can fly and operate the drone with ease. Remember to follow safety guidelines when flying the drone and avoid flying it in restricted areas.
